dsh-units

dsh-units 📐

Unit conversion toolbox for DeepSeek Harness (dsh) — 17 categories, zero runtime dependencies, pure arithmetic over a static unit table (no network, no filesystem, no code execution).

When your agent needs to answer "how many miles is 100 km?", "is 1 MB bigger than 1 MiB?", "what's 350°F in Celsius?", "how many tablespoons in 2 cups?", "16px is how many pt?", "20 mpg in L/100km?" or "150 kW is how much mechanical horsepower?" — instead of doing error-prone mental math, it can call these tools and read exact results.

中文简介：dsh-units 是 DeepSeek Harness 的单位换算工具箱插件，覆盖长度、质量、温度、面积、体积（含美制烹饪单位）、速度、时长、数据大小（十进制 MB 与二进制 MiB 严格区分）、压强、能量、角度、频率、功率（机械/公制/电动马力严格区分）、力、扭矩、排版印刷（px/pt/em/rem）、油耗（L/100km ↔ mpg ↔ km/L）共 17 个类别，零运行时依赖、纯算术实现，无网络无副作用。让 Agent 不再心算——特别是"MB/MiB 混淆""华氏摄氏互转""加仑换升""mpg 与 L/100km 互算""三种马力混淆"这类高频出错点，直接调用工具拿精确结果。

Why it exists

• LLMs are unreliable at unit math. Temperatures are affine (offset), data sizes mix decimal and binary prefixes, fuel economy is reciprocal (mpg vs. L/100km), and compound units (km/h, psi, kcal) hide awkward factors. A wrong conversion silently corrupts reports, recipes, travel plans, and capacity math.
• Fully deterministic and offline. Every factor lives in the static table in src/units.ts — no API keys, no lookup services, nothing to drift.
• Structured results. Each conversion returns the original value, both units (symbol + full name), the result, the formula applied, and the category — so the agent can explain its math instead of just asserting it.

Tools

Tool	What it does
convert_unit	Convert value from one unit to another within a category. Accepts symbols or full names (case-insensitive, °C, m², "miles", "MiB" all work). Rejects unknown units and cross-category pairs with clear errors.
list_units	List all 17 categories with every unit symbol and full name (optionally one category, e.g. "data" or "temperature") — for discovering the exact symbols to pass to convert_unit.

Supported categories

Category	Units (symbols)
length	km, m, cm, mm, um, nm, in, ft, yd, mi, nmi
mass	t (metric tonne), kg, g, mg, lb, oz
temperature	c, f, k — affine conversion with offsets
area	km2, ha, m2, cm2, mm2, mi2, acre, yd2, ft2, in2
volume (incl. cooking)	m3, l, ml, cm3, gal, qt, pint, cup, floz, tbsp, tsp (US units)
speed	km/h, m/s, mph, knot, ft/s
time duration	yr (Julian, 365.25 d), wk, d, h, min, s, ms
data size / transfer	tbit…bit, pb…b (decimal), pib…kib (binary) — MB ≠ MiB
pressure	mpa, kpa, bar, atm, psi, mmhg, torr, pa
energy	kwh, wh, kcal, kj, cal, j, ev
angle	deg, rad, grad
frequency / rotation	ghz, mhz, khz, hz, rpm
typography (CSS / print)	px, pt, pc (pica), em, rem — 96 dpi reference, 16 px base font for em/rem
fuel economy	l/100km, l/km, mpg (US), mpg(uk) (imperial), km/l — reciprocal, mpg ≠ linear
power	mw, kw, w, hp (mechanical = 550 ft·lbf/s), hp(m) (metric PS), hp(e) (electric 746 W), btu/h (IT), ftlb/s — three different horsepower definitions
force	kn, n, dyn, lbf, kgf (kp), gf — lbf/kgf are weight-based at standard gravity 9.80665 m/s²
torque	n.m, kgf.m, lbfft (pound-force foot), lbfin (pound-force inch) — force × length

v0.2.0 note: pt now means the typography point (previously the US pint). Use pint for pints — convert_unit { value: 1, from: "pint", to: "l" } still works. em/rem assume the common 16 px browser default base font size; px assumes 96 dpi (documented assumptions, not physical absolutes).

v0.3.0 note (symbol disambiguation): typed input kn resolves to knot (speed) — reach kilonewton by its full name (convert_unit { value: 1, from: "kilonewton", to: "n" }). Likewise nm is the nanometer (length); the torque newton meter uses the symbol n.m (also n·m or full names).

Install

dsh plugin --profile default add github:TYEclipse/dsh-units

or clone and build locally:

git clone https://github.com/TYEclipse/dsh-units.git
cd dsh-units && pnpm install && pnpm build

Usage

The agent just calls the tools — no setup beyond installation:

convert_unit { value: 100, from: "km", to: "mi" }
→ 100 km = 62.137119 mi (length, × 0.621371)

convert_unit { value: 500, from: "MiB", to: "MB" }
→ 500 MiB = 524.288 MB (data size / transfer, × 1.048576)

convert_unit { value: 350, from: "fahrenheit", to: "celsius" }
→ 350 f = 176.666667 c (temperature, (x − 32) × 5/9)

convert_unit { value: 16, from: "px", to: "pt" }
→ 16 px = 12 pt (typography (CSS / print), × 0.75)

convert_unit { value: 20, from: "mpg", to: "l/100km" }
→ 20 mpg = 11.760729 l/100km (fuel economy, 235.214583 ÷ x → x)

convert_unit { value: 150, from: "kw", to: "hp" }
→ 150 kw = 201.153313 hp (power, × 1.341022)

convert_unit { value: 1, from: "lbfft", to: "n.m" }
→ 1 lbfft = 1.355818 n.m (torque, × 1.355818)

list_units { category: "volume" }
→ volume (volume (incl. cooking), base: liter): m3 = cubic meter | l = liter | ...

Configuration

plugins:
  dsh-units:
    maxDecimals: 6   # display rounding: decimals ≥ 1, significant digits below (1–12)

Safety model

• Pure math. No network, no filesystem access, no subprocesses, no code execution.
• Strict input validation. Unknown units, cross-category pairs, and non-finite values throw descriptive errors instead of returning garbage.
• Display-only rounding. Internal computation keeps full float precision; rounding applies to the returned result only.
• No opinions about validity. Converting -10 K returns the arithmetic result; physical plausibility is the caller's business (documented so agents don't over-trust the tool).

Development

pnpm install
pnpm build   # tsc, strict
pnpm test    # vitest, fully offline fixtures
pnpm lint    # oxlint (src + test only)

License

MIT © 2026 TYEclipse